Wolseley

PENN Controls Products Catalog

Issue link: https://boomart.uberflip.com/i/1442607

Contents of this Issue

Navigation

Page 123 of 367

Selection chart Table 146: Selection chart Factory Setting Product Code Number No. of Stages Contact Action Range psi (kPa) psig (kPa) Switch Diff psi (kPa) Pressure Connector P10BC-7C 1 Single-Pole, Double-Throw (SPDT) 3 to 20 (21 to 138) 12 (R to Y Cut-in) 2 Barbed Fitting P10BG-3C 1 SPDT 2 to 20 (15 to 138) 12 (R to Y Cut-in) 0.2 1/8 in. Internal NPSF P10BJ-1C 1 SPDT 3 to 20 (21 to 138) 12 (R to Y Cut-in) 2 1/8 in. Internal NPSF P10FC-4C 2 SPDT 3 to 20 (21 to 138) (R-Y Cutout) Low Stage 8 (55) (R-Y Cut-in) High Stage 12 (82) Low Stage 2 (14) High Stage 2 (14) 1/8 in. Barbed Fitting P10PA-11C 3 Single-Pole, Single-Throw (SPST) 3 to 20 (21 to 138) Stage One Open High 6 (41) Stages Two & Three Open High 18 (120) Stage One 3 (21) Stages Two & Three 0.4 (3) 1/8 in. Barbed Fitting P10 Low Pressure Controls technical specifications • model P10BJ-1 is rated for 24 A non-inductive when used as a single-pole, single-throw (SPST) (R-Y). (See Electrical Ratings chart below.) • maximum allowable pressure is 150 psig (1,034 kPa) • maximum ambient temperature is 140°F (60°C) Table 147: Electrical Ratings Motor Ratings VAC 120 208 240 277 600 P10BC-7 AC Full Load A 16.0 9.2 8.0 7.0 – AC Locked Rotor A 96.0 55.2 48.0 42.0 – Non-Inductive A 16.0 9.2 8.0 7.2 – Pilot Duty 125 VA, 24 to 277 VAC P10BG-3 AC Full Load A 6.0 3.4 3.0 – – AC Locked Rotor A 36.0 20.4 18.0 – – Non-Inductive A 6.0 3.4 3.0 2.6 – Pilot Duty 125 VA, 24 to 277 VAC P10BJ-1 AC Full Load A 16.0 9.2 8.0 7 – AC Locked Rotor A 96.0 55.2 48.0 42 – Double Throw 16.0 16.0 16.0 16.0 16.0 Non- Inductive A Single Throw 24.0 24.0 24.0 24.0 24.0 Pilot Duty 125 VA, 24 to 600 VAC Table 147: Electrical Ratings Motor Ratings VAC 120 208 240 277 600 P10FC-4 AC Full Load A 16.0 9.2 8.0 7.0 – AC Locked Rotor A 96.0 55.2 48.0 42.0 – Non-Inductive A 16.0 9.2 8.0 7.2 – Pilot Duty 125 VA, 24 to 277 VAC On two- and three-stage models, maximum connected load shall not exceed 2,000 VA P10PA-11 AC Full Load A 6.0 3.4 3.0 – – AC Locked Rotor A 36.0 20.4 18.0 – – Non-Inductive A 6.0 3.4 3.0 – – Pilot Duty 125 VA, 24 to 277 VAC On two- and three- stage models, maximum connected load shall not exceed 2,000 VA 124 Refrigeration Products Catalog

Articles in this issue

Archives of this issue

view archives of Wolseley - PENN Controls Products Catalog