Wolseley

PENN Controls Products Catalog

Issue link: https://boomart.uberflip.com/i/1442607

Contents of this Issue

Navigation

Page 328 of 367

C450CCU condensing unit control module technical specifications Table 358: C450CCU condensing unit control module technical specifications Specification Description Product System 450 Series C450CCU condensing unit control module Power supply Use one of the following power supplies: C450YNN power supply module 24 (20-30) VAC safety extra-low voltage (SELV) (Europe) Class 2 (North America), 50/60 Hz, 10 VA minimum 20 VDC–30 VDC, 2 watts minimum for control, and then 1 additional watt for each output you attach Note: Connect a System 450 control module to only one power supply. Ambient operating conditions Temperature: -40°C to 66°C (-40°F to 150°F) Humidity: Up to 95% RH noncondensing; maximum dew point 29°C (85°F) Ambient shipping and storage conditions Temperature: -40°C to 80°C (-40°F to 176°F) Humidity: Up to 95% RH noncondensing; maximum dew point 29°C (85°F) General: 1/2 HP at 120/240 VAC, SPDT Output relay contacts Specific: 120 VAC: AC full-load amperes: 9.8 A AC locked-rotor amperes: 58.8 A 208/240 VAC: AC full-load amperes: 4.9 A AC locked-rotor amperes: 29.4 A 10 amperes AC non-inductive at 24/240 VAC Pilot duty: 125 VA at 24/240 VAC Enclosure Type 1 (NEMA), IP20 high-impact thermoplastic Dimensions (H x W x D) 127 mm x 61 mm x 61 mm (5 in. x 2 3/8 in. x 2 3/8 in.) Weight C450CCU: 222 g (0.49 lb) United States: ULus Listed; UL 60730-1, File E27734; FCC Compliant to CFR47, Part 15, Subpart B, Class B Compliance Canada: cUL Listed; CAN/CSA-E60730-1, File E27734; Industry Canada (IC) Compliant to Canadian ICES-003, Class B limits Europe: CE Mark – Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive and RoHS Directive. Australia and New Zealand: RCM mark, Australia/NZ emissions compliant The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult Johnson Controls Application Engineering at (414) 524– 5535. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products. 329 Refrigeration Products Catalog

Articles in this issue

Archives of this issue

view archives of Wolseley - PENN Controls Products Catalog