Wolseley

PENN Controls Products Catalog

Issue link: https://boomart.uberflip.com/i/1442607

Contents of this Issue

Navigation

Page 73 of 367

Table 77: A99 Temperature Sensors Product code 1 Description A99BC-300C 1 PTC temperature sensor: Standard probe 2 in. (5.1 cm) with 9.8 ft (3.0 m) high-temperature silicon cable; ambient operating temperature range: -40°F to 248°F (-40°C to 120°C) A99BC-500C 1 PTC temperature sensor: Standard probe 2 in. (5.1 cm) with 16.4 ft (5.0 m) high-temperature silicon cable; ambient operating temperature range: -40°F to 248°F (-40°C to 120°C) A99BC-1500C 1 PTC temperature sensor: Standard probe 2 in. (5.1 cm) with 49.2 ft (15.0 m) high-temperature silicon cable; ambient operating temperature range: -40°F to 248°F (-40°C to 120°C) A99CB-200C PTC temperature sensor: Extended probe 6 in. (15.2 cm) with 6.6 ft (2.0 m) PVC cable; ambient operating temperature range: -40°F to 212°F (-40°C to 100°C) A99CB-600C PTC temperature sensor: Extended probe 6 in. (15.2 cm) with 19.7 ft (6.0 m) PVC cable; ambient operating temperature range: -40°F to 212°F (-40°C to 100°C) 1 When any A99 Series Temperature Sensor is connected to a standard A421 Control model, the range of displayed temperature values is -40ºF to 212ºF or -40ºC to 100ºC. Table 78: Accessories Product code Description BKT287-1R 12 in. (305 mm) long DIN rail section BKT287-2R 36 in. (914 mm) long DIN rail section PLT344-1R Two end clamps for DIN rail sections A99-CLP-1 Surface mounting clip for A99B and A99C Series Temperature Sensors SHL10-603R Sun shield for A99B and A99C Series Temperature Sensors BOX10A-603R PVC enclosure for A99B and A99C Series Temperature Sensors WEL11A-601R Brass and copper immersion well for applying sensor in fluid applications TE-6300W-102 Stainless steel immersion well for applying A99 sensors in fluid applications. (A99CB Type sensors with extended probe are recommended for use with this immersion well.) Technical specifications Table 79: A421 Series Electronic Temperature Control Technical Specifications Specification Description Power consumption 1.8 VA maximum Supply power 110/120 or 208/230/240 VAC, 50/60 Hz Table 79: A421 Series Electronic Temperature Control Technical Specifications Specification Description Type 1/IP20: Operating: -40°F to 150°F (-40°C to 66°C), 0% to 95% RH noncondensing Shipping and storage: -40°F to 185°F (-40°C to 85°C), 0% to 95% RH noncondensing Ambient conditions Type 4X/IP66: Operating: -40°F to 140°F (-40°C to 60°C) Shipping and storage: -40°F to 140°F (-40°C to 60°C) Temperature control range -40°F to 212°F or (-40°C to 100°C) Sensor type A99 PTC temperature sensor: 1,035 ohm at 77°F (25°C) Sensor offset range ±5ºF or ±3ºC Enclosure material Type 1, IP20 high-impact thermoplastic or Type 4X, IP66 watertight, corrosion-resistant, high-impact thermoplastic Note: To maintain type 4X / IP66 rating, tighten enclosure screws to: 10-12 in·lb Compliance North America: cULus Listed; UL 60730, File E27734; FCC Compliant to CFR47, Part 15, Subpart B, Class B Industry Canada (IC) Compliant to Canadian ICES-003, Class B limits Europe: CE Mark – Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive; Low Voltage Directive. Australia/NZ: RCM Emissions Compliant The performance specifications are nominal and conform to acceptable industry standards. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products. 74 Refrigeration Products Catalog

Articles in this issue

Archives of this issue

view archives of Wolseley - PENN Controls Products Catalog